Standard vs tight CNC tolerances explained: ISO 2768 grades, when ±0.005 mm is worth paying for, and how to specify tolerances that don't inflate part…
Choosing between rapid aluminum molds and production steel molds for 100-10,000 parts: cost, lead time, mold life and when bridge tooling wins.…
How FRP/GRP composites replace metal in cars: 50-70% weight savings, design freedom, corrosion resistance — and when composites are the wrong choice.…
A practical comparison of 3D printing (SLA/SLS/MJF) and CNC machining: cost per part, accuracy, materials, lead time — and a decision table for common…
How urethane vacuum casting works, real material properties vs injection molding, cost and lead time benchmarks, and when to switch from silicone mold…
The 12 sheet metal design rules we check on every DFM pass: bend radii, hole-to-edge distances, relief cuts, uniform thickness and the features that q…
Machined vs molded plastic parts compared on real numbers: tooling cost, unit price crossover at 100-500 pieces, tolerances, lead time and the design …
When a housing should be laser-cut and bent rather than milled from solid: wall thickness, tolerance class, per-part cost at 1-500 pieces, lead time a…
Aluminum die casting vs CNC machining compared on tooling cost, per-part price, tolerances, wall thickness and lead time — with a decision table for v…
When a CNC machined heat sink beats extrusion and casting: geometry freedom, no tooling cost, MOQ 1, 3-7 day lead times, and the tolerances that matte…
Thermal conductivity of common heat sink materials compared — 6061 (167 W/m·K), 6063 (209), copper (401) — with weight, cost and machinability trade-o…
How rapid injection molding works: aluminum tooling in 7-10 days, T1 samples in ~2 weeks, 100+ resins, MOQ 1 — and when it beats CNC machining and 3D …
The 9 factors that decide CNC machining cost — machine time, setup, tolerances, surface finish, geometry, 3 vs 5 axis, quantity, material and inspecti…
Rapid aluminum molds (7-10 days) vs production steel molds (15-25 days) compared on cost, mold life, fidelity and program risk — with bridge tooling a…
SkillsProto machines 7075-T6 aluminum to ±0.005 mm with 3–7 day lead times. Compare 7075 vs 6061 vs 2024, see real tolerances, finishes and cost drive…
6061-T6 machined to ±0.005 mm in 3–7 days by SkillsProto. Compare 6061 vs 7075 vs 2024, see real tolerances, finishes, cost drivers and design rules f…
SkillsProto machines 304 stainless to ±0.005 mm in 3–7 days, MOQ 1. Compare 304 vs 316 vs 303, real tolerances, finishes, cost drivers and design rule…
Titanium Grade 5 CNC machining at SkillsProto: 950 MPa tensile strength, ±0.005 mm tolerances, 3-7 day lead time, and the real cost drivers behind tit…
ABS injection molding at SkillsProto: 0.5-0.7% shrinkage, ±0.05 mm tolerances, aluminium tools in 7-10 days, and the design rules that cut tooling cos…
Xometry alternative: SkillsProto runs its own Shenzhen factory with MOQ 1, ±0.005 mm CNC, 3-7 day lead times, DFM feedback in 24 hours and DDP in 3-5 …
Protolabs alternative: SkillsProto pairs an engineer-led Shenzhen factory with ±0.005 mm CNC, MOQ 1, DFM in 24 hours, FRP and vacuum casting, DDP in 3…
How UK teams compare local and offshore rapid prototyping companies: landed cost, 6-12 day DDP lead time, 48-hour express CNC, and when a UK supplier …
Eight design changes that cut CNC machining cost by 10-45%: looser non-critical tolerances, fewer setups, standard hole sizes, plus a worked example w…
RapidDirect alternative: SkillsProto runs its own Shenzhen factory with MOQ 1, +/-0.005 mm CNC, 3-7 day lead times, DFM in 24 hours and DDP in 3-5 day…
Automotive prototype parts built in Shenzhen: CNC 3-7 days, MOQ 1, ±0.005 mm on datums, vacuum casting 10-500, sheet metal and FRP, DDP 3-5 days.…
Prototype enclosures, instrument housings and jigs for medical device teams: CNC ±0.005 mm, MOQ 1, 3-7 days, material certificates, DDP to the UK and …
Robot prototype parts from Shenzhen: CNC brackets and end effectors at ±0.005 mm, MOQ 1, 3-7 days, sheet metal frames, vacuum cast covers 10-500.…
Non-flight aerospace prototype parts, ground test hardware and assembly jigs: CNC ±0.005 mm, MOQ 1, 3-7 days, aluminium and stainless, DDP 3-5 days.…
Prototype electronics enclosures and heat sinks: CNC aluminium at ±0.005 mm, MOQ 1, 3-7 days, vacuum cast covers 10-500, EMC-aware finishes.…
Prototype parts for industrial machinery: CNC ±0.005 mm, sheet metal frames and guards, MOQ 1, 3-7 days, wear parts and low-volume spares.…
Fictiv alternative: trace who actually machines your part. SkillsProto runs one Shenzhen plant, MOQ 1, ±0.005 mm, 3-7 days, DFM in 24 hours, DDP 3-5 d…
Vacuum casting vs injection molding compared: 60-80% cheaper under 100 parts, 5-10 day lead times, and the exact quantity where aluminum tooling start…
3D printing vs vacuum casting for prototypes: SLA/MJF speed for 1-5 iterations, cast urethane material fidelity for 5-50 units, lead times and costs c…
Motorsport rapid prototyping from Shenzhen: race car brackets and aero parts in 3-7 days, CNC ±0.005 mm, MOQ 1, composite tooling and 10-500 piece run…
Landed cost beats unit price when comparing prototype quotes. SkillsProto quotes DDP in 3-5 days, handles duty and clearance, MOQ 1, CNC 3-7 days, ±0.…
Pin fin, straight fin and skived heat sinks compared on thermal resistance, fin density, machining cost and lead time. SkillsProto machines both in 3-…
Injection molding cost splits into tooling, unit price and volume. See how each line is calculated, where aluminium beats steel, and when SkillsProto …
Fifteen checks that decide whether a plastic part molds cleanly: wall, draft, ribs, radii, undercuts, tolerance and gate. SkillsProto reviews DFM in 2…
5-axis CNC pays off on compound angles, deep cavities and single-setup tolerance stacks, not on flat plates. SkillsProto quotes both routes at ±0.005 …
Where CNC lead time actually goes, which six inputs add days, and how to compress a quote to 3-7 days without an expedite fee. SkillsProto quotes in 2…
Extruded profiles win above about 1,000 identical units; machined heat sinks win below that and on non-linear fin geometry. Break-even maths, thermal …
What a heat sink prototype costs: fin count, fin depth, base thickness, flatness callout and finish, plus lead times for the machined, extruded and ca…
Print for 1-10 units while the design is still moving; mold from about 100 parts once geometry is frozen. Cost per part, finish, material and lead tim…
Ra 12.5 to 0.4 micrometres mapped to the operation that achieves it, the cost each step adds, and how to call surface finish out without over-specifyi…
Hydraulic manifold prototyping: CNC machined blocks to ±0.005 mm on port faces, deep cross-holes, MOQ 1, 3-7 days, with a deburring and cleanliness ro…
Six Protolabs alternatives for low-volume production compared: marketplace platforms, own-factory suppliers and local shops, on MOQ, tolerances and le…
6061-T6 for weldability and corrosion resistance, 7075-T6 for strength-critical parts. Properties, machinability, anodizing and cost compared side by …
How CNC machining behaves from 1 to 1,000 parts: per-part cost at each quantity band, the 100-500 piece crossover to molding, and when tooling wins.…
Size a heat sink from a thermal budget: the resistance path, spreading resistance, fin area at real airflow, a worked example and the machining limits…
Where injection molding lead time goes: aluminium tooling at 7-10 days, steel at 15-25, T1 samples around two weeks, and the five causes that push a m…
Prototype jigs, fixtures and inspection tooling for medical device lines: CNC ±0.005 mm, MOQ 1, 3-7 days, FAI with every order, DDP to UK and EU in 3-…
DDP puts customs, duty and import VAT on the seller, turning landed cost into one number. What DDP covers on a China-to-UK order, and where EXW quotes…
Déposez vos fichiers — devis vérifié DFM sous 24 heures.